How to Program New Keys for Peugeot with Lexia 3 diagbox PSA interface

Lexia-3 PP2000 PSA interface with Diagbox V7.76 is obd2cartool professional diagnostic tool for Citroen and Peugeot. lexia3 diagbox supports read identification and read fault codes (for normal use) for most of Citroen and Peugeot vehicles from 1995,now support Peugeot 307! Here obd2cartool.com would like to show you how to program Peugeot new keys with Lexia 3 diagbox.

Attention: PIN Code is required during key programming procedure. Record your vehicle PIN code first.

Procedure to program Peugeot new keys:
1. Install and activate Lexia 3 PP2000 diagbox software.
2. Select vehicle model 307 and wait until the well communication built.
3. Check the entering vehicle information.

4. Select the application as “Peugeot Plant 2000” and confirm it.

5. Select test by ECU;
6. Choose “Built-in systems interface”;

7. The system is reading the ECU in progress, follow and accept the windows prompts.
8. Select “Learning” option under carry out the tests menu display.

9. Select “Programming of keys”;

10. The system will display key programming procedure when activation process is completed. Confirm to continue;
11. Confirm Unlocking the E.C.U program;
12. Manually enter the “Confidential code” (PIN Code).

13. The system is verifying the PIN code. If the code is correct, the built-in systems interface is ready for programming of keys;
14. Enter the key number to be learnt. The number of keys to be programmed cannot exceed 5.

15. Follow the screen prompt to switch off the ignition
16. Then switch ignition to ON within 15 seconds.

17. Key programmed, switch off the ignition and take out the key.

18. Switch ignition ON again and insert the next key in the ignition. Repeat the key programming procedure to program another key. When complete programming, the system will display keys that are programmed.

19. Follow the screen instructions. Check the handbrake is on. For an automatic gearbox, check the gear level is in position “P”. For a manual gearbox, check that the gear level is in neutral;
20. Follow the re-synchronies the HF remote controls procedure to operate until the “End of key programming procedure” notice displays. Exit the program.

How about lexia3 PP2000 with Diagbox V7.76 Software?

How about lexia3 PP2000 with Diagbox V7.76 Software

Lexia3 PP2000 Interface is obd2cartool professional diagnostic tool for Citroen and Peugeot. V48 Lexia-3 PP2000 V25 compatible with most of Citroen and Peugeot cars from 1995. Lexia-3 support read identification,read fault codes,clear fault codes,auto-scan etc,It is available with multiple language, now support Peugeot 307!

Lexia-3 lexia3 V48 PP2000 V25 with Diagbox V7.76 Software for Peugeot and Citroen Support 307/C5


1. Update: By CD
2. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
3. It works for both Citroen and Peugeot. Now support Peugeot 307!
4. Version: Lexia3 V48, PP2000 V25, Diagbox V7.76
5. Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
6. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
7. PP2000 have 2pcs Optocouplers

LEXIA-3/PP2000 Description:


1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
2.It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

 Golden edge 921815C Firmware Lexia3 PP2000 has two version:

1.Full chip with 921815C Firmware Lexia3 PP2000

2.Not full chip with 921815C Firmware Lexia3 PP2000