eMMC programmer adapter reader BGA169/153/162/186/221

eMMC/eMCP 3in1 programming adatapters is an easy use tool to connect chip and PC. Just like a U disk. Includes size limiter: 11.5x13 12x16 12x18 14x18mm. eMMC/eMCP 3 in 1 Adapter socket is designed for test, debug, validation, data recovery and programming of eMMC. obd2cartool.com provides a compact test solution for eMMC used in applications such as mobile, data recorder, the Internet of things, etc.


eMMC/eMCP 3in1 test socket for BGA169/153/162/186/221

1) Support package: BGA169,BGA153,BGA162,BGA186,BGA221
2) Support eMMC: thickness is 0.8 to 1.5mm, pin pitch is 0.5mm
3) Long life span: 100,000(Mechanical)
4) Support all brand eMMC,such as Samsung, Hynix, Sandisk, Toshiba, Intel, Kingston etc
5) Support hot plug, eMMC can be directly connected to PC with the usb connector
6) Identify, reading, accessing and writting data
7) Well designed to connect flat bottom, solder ball,even if no ball.


Product use:
Programming Block, Test Block, for EMMC162 / 221 / EMMC153 / 169 of IC chip testing, read and write


Test Methods:
1. Select and IC matching the bounding box, placed parallel to the direction of the IC SOCKET press within
2, the USB cable into your computer USB port, turn on the power switch on the nest, select the appropriate test procedures


Applicable Package:
EMMC153 / 169 EMCP162 EMCP221 pin pitch 0.5mm


Test Block:
EMMC153 / 169-0.5 EMCP162 EMCP221


YIHUA 3-in-1 BGA Rework Station better support repair work!!

YIHUA 3-in-1 BGA Rework Station Specifications:

Heating power:  600W
Heating area:  130 X130mm
Heating Hugh material:  ceramic heating body
The temperature sensor: K thermocouple type
 temperature range: 50 C-350 C
The thermometer test range: 0-400 C
Use of the environment temperature: 0-40 C
Temperature stability degree is: +_1 C
Envelop dimensions :255 (L) X200 (W) X63 (H) mm


Operation:

A: preheat the original (with desoldering tools use)
1. Put the plug in the PCB powder, will be processed on the original preheater has right in the middle.
2. According to the size of the components of the PCB thickness set temperature, turn on the power switch, the preheater has will immediately; Heating up to you immediately well-posed temperature, then constant temperature.


B: remove the original

1: set up to process of PCB, put to the demolition of components in the preheated dish.
2: according to the size of the components, the thickness of the circuit board, PCB tin melting point, set the temperature.
3: set temperature, the temperature reaches constant after began warming, watch the components foot tin point light began to appear. When he saw the components of melting point feet used tweezers, will pick up components. When components dismantled and can't immediately move board, so when the PCB ministries of components of the tin pin point in near melting point, move board will shift other components. At this time, should will turn off the power to the PCB temperatures drop to room temperature to take down PCB.


Technical Data:

Power consumption 720W
Gun temperature 100-480oC
Gun type Brushless fan , gentle wind
Air flow 120L / MIN
Gun heater material Ferro-alloys
Gun heater resistance 74Ω
Temperature Range 200-480oC
Iron heater material import high-power heater
Iron type blue handle


More details:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Highly recommented Latest Vagcom 20.4.2 En/IT Vcds online updatable version

Have you own obd2cartool.com latest online update vagcom cable? How this original plan vcds updatable cable works? Maybe you have lots of questions to ask before you buy obd2cartool.com best quality vagcom 19.6.1 hex can usb diagnostic cable.

Vagcom 20.4.2 HEX CAN USB Interface VCDS 18.9.1 online update version 16 multilanguage

PC inside: ATMGA162  (The latest chips)
Firmware version: update online

Why choose OBD2cartool Original Plan VCDS Kable 19.6.1:

1. GLOF6 CAN Work, Best Quality Vag com VCDS Cable from obd2cartool.com works with almost of VAG vehicles including VW / Audi / Seat and Skoda

2. 100% same functions with original VCDS. 100% online upgrade by the original website.

3. Installed VCDS 20.4.2 EN Support 16 languages, including of Chinese, English, French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, Romania.

4.The latest generation of hardware and firmware,the original design(original PCB and shell,2m long data cable).Support the latest modele car,More stable performance,more comprehensive and stable coding, while the installation of all versions of VCDS.

5.Provide to charge service of software upgrade( firmware and upper software) for others' OEM VCDS .

Customer voice from obd2cartool.com:

Thanks help me update Vagcom 17.1.3 to newer RT VAG COM 17.8.1 version, you are the best!!

Works as genuine, updated to 19.6.1 using genuine software successfully also. A++++

Q: hello friend,i just received cable order vcds 18.9 online update full, may I attach you the file to activate? i need to activate to a netbook I also have, i must send another activation,correct?
A: hello, dear friend, yes, for vcds 18.9 online update cable pls send request license to obd2cartool@outlook.com, if you wanna change to another laptop, need to active again, and also with your order number. Rgds


Good News, I installed released vcds 20.4.2, interface still work smooth, really nice cable!!!

Xmas VIP price for KESS V2 V5.017+ K-TAG V7.020

We provide the Best Price here for KESS V2 V5.017 and K-TAG V7.020 all red full components pcb with ECM TITANIUM, all with Murata . now obd2cartool nice price for KESS V2 V5.017 and K-TAG V7.020, both no need do rework, and will get a big discount and save more money.

BDM Frame With 4 Probes Dimsport bdm frame Mesh And LED Work For Kess KTAG FGTECH BDM100，New LED bdm frame with probe mesh and led is designed for kess ktag fgtech bdm100 ecu programming.

KTAG KESS KTM Dimsport BDM probe adapters full set 22pcs for Denso, Marelli, Bosch, Siemens，KESS KTAG KTM Dimsport BDM Probe full set Adapters especially for ECU programmer used with BDM Frame.

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

Porsche Wifi Piwis Tester 2 VCI with CF30 Installed V18.100 Software Ready to Use

Samtec Wifi piwis tester ii work with the full system porsche car ,Piwis II Wireless tester comes with best piwis ii VCI , support online function, Semtec Piwis Tester 2 is equiped with the panasonic CF30 laptop and V18.100 software installed ready to use.

Why choose samtec Porsche Piwis II Wireless tester:

1. This Piwis ii wireless tester obd2cartool.com sell is best quality which is made in Tainwan, and it is Semtec Hardware, which is 100% same as the porsche dealer has, not J2534 hardware, the J2534 FTDI hardware comes with different PCB,  and it has no certification make it is not able work with all modules, not support online functions.

2. Certificate is well installed, our Piwis II supports Online Functions, only two functions need to work online: Teach keys immo function and Parts protection function.

Tips:
After finish diagnostic, please quit the connection, and quit to the homepage of the software, then shut off the laptop in correct way(DO NOT Press Power Button, otherwise the system will be damaged).


PIWIS II Developer Mode is engineering mode software for Porsche diagnosis and programming(online & offline), PIWIS II Developer Mode work with Piwis tester ii samtec hardware original plan for Porsche.

PIWIS Tester II scanner is the professional tool which is used by porsche dealer, is able to work with Porsche cars from 1996 to 2017 year, special for the Panamera which can only be diagnosed by it.

And it can work with ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System, KEYLESS GO system, OBDII system.

But some module such as F BCM R BCM DME ELV SRS KEY will ask for porsche online coding with porsche dealer account.

obd2cartool.com support Porsche online programming account one time service, it is to get the porsche piwis coding account via teamviewer to do for one control unit.


OBD2cartool - China Professional Automotive Diagnostic Tool, Test socket adapter, Odometer correction tool ,Auto Key Programmer, Ecu Chip Tuning Tool and locksmith tool Supplier for Diy Car Mechanic, Garage, Workshop.

Some MB SD Connect C4 Xentry Das fault slove ways

Mercedes Benz SD C4 is the professional diagostic tools for Benz vehicle . MB SD Connect C4 with Mercedes SCN Online coding account for MB Star Diagnosis & programming. MB SD Connect C4 12/2017 Xentry software already released .

But when work MB SD Connect C4 for Benz vehicals, many be got some issues , how to slove them? there obd2cartool.com will share some issues already solved by technicians.


1. MB SD Connect C4  fails to connect and comes up with the error message:

Das fault (1.1) -1.501.9878

The Mercedes Diagnostic MB SD Connect C4 is connecting, with diagnosis computer both by lan cable or wifi ( passed and respond to all self tests), no lcd problems or blocked ) . The fault comes when das try to initialize the MB SD Connect C4 mux green led blinks about 10 sec, and this fault comes no matter is from das standalone or launched from xentry.

Software & Install:

xentry12.2015 , das bin, blacklist fixed etc on a dell d630 appid 253 and …

MB SD Connect C4 Star Diagnosis Software Mercedes Benz Xentry Das fault (1.1) -1.501.9878

Solution:

You must change IP address in windows.172.29.127.119:

Go into “Control Panel” ,”Network Connection”,”Local Network Connection”,> right click > properties > choose this one with TCP/IP, select this, chose properties, choose manually ip, and put this ip “172.29.127.119”,mask 255.255.0.0 (as you will get when type ip), rest of field, leave blank.

if it does not work

Try one more time make update of these 2 package.


2. When work with Mercedes Benz SD C4 for Benz vehicle .sometimes will face to error message "DCDI_eErrorCode=204 (204)" when using MB SD Connect Compact 4 star diagnosis. obd2cartool solved the solution of the Error"DCDI_eErrorCode=204(204)" of MB SD C4 following.

Error： DCDI_eErrorCode=204 (204)

tray icon:

Reasons for Error 204:


Star diagnosis SDConnect 4 unit is still not configured correctly.

How to check MB SD C4 Error DCDI_eErrorCode=204 (204)?

1. Make sure you have applied blacklist fix to your Xentry/Llist folder (fixed cal.sli)
2. Punt 6 fully charged AA batteries into your SDunit.
3. Power up the SD unit (connect to a car or 12v OBD source)
4. On the Sdunit Press “Power button” twice till you see “Delete configuration” and then do it. Atfer that you shoud see Name “00”.
5. Connect SDunit and laptop by green LAN cable.
6. Set IP address in Local area connection properties 172.29.127.119
7. Go into SDtool kit and configure your SDunit again. Choose any number from the list. For WiFi connection set IP 192.168.2.111.


How to update MB SD C4 Firmware Procedure?
1. Prepare 6 common AA batteries of 5. Then install the battery by following the “1.Installing the battery for C4.pdf” file.
Notes: The batteries need to be new with fully charged.
2. Connect the MB SD C4 interface with the computer by green cable. Then use the OBD cable to connect the MB SD
 C4 interface with car. If can not connect car, please use the OBD 12V power supply to take place of car.
Or it will display update failure errorcode 602.
3. Open the DAS software. Then check those 3 files Update_automatic, Update_manual, Update_Special from the

C:\programm files\SDconnect Toolkit. If the name of the file is not right, please correct it.

4. Restart the computer.
5. Start to update MB SD C4 Firmware by following the file from: “2.Update SDconnect“.

More information:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Skype: great2obd

2017 Hot sale OBDII ECU Chip Tuning Tool for workshop

2017 Hot sale OBDII ECU Chip Tuning Tool for workshop

"What is the best OBDII ECU Programmer for my workshop do Cars,trucks ? "
This is the questions asked by most customers. obd2cartool.com will share Red PCB KESS V2 5.017 Europe Version, FGTech Galletto 4 Master V54 and KTAG 7.020 Red PCB Master Version for customers.


Hot sale ECU Chip Tuning : KESS V2 5.017 Red PCB full components

Newest Red KESS FW5.017 EU Version is the most powerful and amazing ECU Flasher Tool IN 2017,is the perfect replacement of other kess v5.017 currently available in the marketplace. The New Red KESS 5.017 Unlimited Tokens with a newer fashionale design and better quality and performance,see striking features below

1. With best PCB board full components no need do rework.
2. Better performance,function as well as more online protocols supported.
3. Online Operation Supported, No tokens limited.
4. Multi-Languages supported.
5.Perfect for OBD use,Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use .
6.No reset button,no USB dongle,no tokens limited and has tested by many users as well as our technology department, 100% workable.


Hot sale ECU Chip Tuning : K-TAG KTAG 7.020 Red PCB full components

KTAG 7.020 Master is the new generation KTAG Master Kit for all the ECU that need to be programmed with Jtag, BDM and Boot protocols(tricore and ST10) .Just as we knew, there still are lots of ECUs need to be disported ,so in this case, KTAG FW7.020 will be the best choice and the price is cheap too. KTAG FW7.020 supports online operation,no tokens limited, multi-langagues supported and full activated for all online protocols.


There is Ktag 7.020 best friend, BDM Frame With 4 Probes Dimsport work togeter will be fine!

Hot sale ECU Chip Tuning : FGTech Galletto 4

FGTech Galletto 4-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone. Our system comes furnished complete with all Car, Truck, Motorbyke, Marine, BDM MPCxx , BDM Boot Mode, checksum.

More details:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Skype: great2obd

Mercedes Online SCN Code Account MB Star diagnosis C3/C4/C5 SCN Coding

Mercedes Star diagnosis Online SCN Code is for mercedes benz online programming services. MB SD C3/C4/C5 Star diagnosis Online SCN Coding for ME Control Unit. obd2cartool.com supply Mercedes SCN Code Online Account For MB Star C3/C4/C5 with one time or one month .
 

Mercedes Online SCN Code Account MB Star diagnosis C3/C4/C5 SCN Coding

 

obd2cartool.com supply Mercedes SCN Code Online Account For MB Star C3/C4/C5 with one time or one month, not suggest with longer time SCN Code account.
 

Mercedes online scn code from obd2cartool.com:
when there are experiencing trouble with your transmission, there is a good chance the problem from your ME Control Unit and SCN coding is needed to resolve your issue.
Unauthorized technicians can not fix this problem because only certified technicians can access the Mercedes-Benz server.
 

Why all work on your Mercedes should be done by a technician who with SCN certified.
SCN coding is required to update the software when a new Electronic Transmission Controller (ETC) or fuel control unit (ME) is installed. In a majority of the systems in Mercedes Benz, SCN coding is required after the replacement.
These systems include: SRS airbag computer, 722.9 gearbox computer replacement, Gearbox module, SAM computer, ABS, ESP control unit, the COMAND system, intelligent headlight computer instrumentation, and ME modules, among others. All these systems require the network authorization from the Mercedes-Benz Technical Service Center for the completion of the process. Unauthorized technicians can't do this.
 

Why need obd2cartool.com mercedes benz online programming Services?

Firstly , it is required by law; you may also be fined if you have not performed this crucial step. Secondly, you need this if you want to make sure that your vehicle works at optimal levels. SCN coding is also required to prevent any aftermarket enhancements to improve the performance.
If you want to install additional control module(Units) in the future, it require SCN coding.
 

when you need online SCN code do programming?
when you check engine light will be on. You may notice that your transmission gets stuck in a 1 gear. If you turn the engine off and on again, this may resolve the problem, but only temporarily, but the same thing happens again.
You may also feel a kick when you shift into drive or reverse. Any of these could be signs that your Mercedes needs SCN coding.
 

How use online MB Sd Connect Mux C4 scn code to work :
 


 
The repair process of the ME control unit requires the technician to update the software in order to solve the real issue. Now, to update and correct the software programming, you need to re-code it with the help of SCN Coding. To repair the ME control unit two steps are required; flashing and updating the software by using the Software Calibration Number (SCN). However, most independent Mercedes Benz service shops cannot perform this process of updating Mercedes Benz ME control unit SCN because only the authorized technicians can access Mercedes-Benz server.
 
Why flash is required in the updating process of Mercedes Benz ME control unit software? In simpler terms, flash is a method to update the ME control unit software. Flashing would be required in many circumstances; for instance, in cases when your DTB requires the software to be updated, when TAC/EDAC requested the updated software, if there is any part with new ECU number or when a new Mercedes Benz ME control unit is identified by SCN.
 
 
More details:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

HQ Porsche Piwis tester ii Piwis 2 VCI with Samtec hardware

Porsche piwis vci is professional dealer level diagnostic tool for porsche vehicles. OBD2cartool Samtec Vci hardware is Samtec project 1:1 same as original plan supprot HW update. Samtec vci piwis 2 is highly recommended by famous obd forum and workshops.

High Quality Samtec Piwis tester 2 Piwis II VCI for Porsche

Why choose HQ samtec piwis vci for porsche from obd2cartool.com?

Reasons 1: Original Semtec project interface, can update, not J2534 or bad clone can't update or locked (choose a best one will save your money and save your time!!!  got a poor quality one after 2-3 month broken, then should send it back to repair. it  will lost shipping cost, lost device for diagnosis, lost business!)
PS: Famous OBD forum mhh Cartechlogy AP recommended version!

Reasons 2. Full access to porsche Development verison!

Reasons 3. Version: v18.150 support 2017 Porsche cars, if you need software installed ready to use, please look this port: PIWIS Tester 2 software.

Reasons 4. Bluetooth,GPS and Navigation Function are available. can modify in Engineer mode.

Reasons 5. Certificate is well installed, our Piwis II supports Online Functions, only two functions need to work online: Teach keys immo function and Parts protection function.

If order Samtec HQ Piwis tester II VCI True WIFI function from obd2cartool.com, please note how to set wifi:

TIPS FOR CONFIGURING THE PIWIS II WIFI ROUTER
Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN

Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)

More detail:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Skype: great2obd

Latest VAG/VCDS HEX-V2 Vcds 20.4.2 USB interface coming!!

ATMEGA Hex-v2 is the new generation of obd2 diagnostic interface for vag vehicles. obd2cartool.com VCDS Hex-v2 USB Interface VAG 20.4 support 5M baud rate communication, it is ensure the integrity and efficiency of data transmission..  Atmega162 HEX V2 VCDS 19.6.1 full active cable For VW Audi Seat Skoda,it is BUG fixes and improvements support Windows 10 system.


ATMEGA Hex-v2 VCDS 20.4.2 Features:

Language: Multilanguage
Software Version: VCDS 20.4.2 (newer version 20.12.0 Release)
Firmware Version: 1.96
Supported Vehicle List: For AUDI VW SEAT SKODA
Chip Edition: ATMEGA162 + FT232RQ + 9241 + 16V8B +ATA6561
System requirement: Windows XP, Vista, 7, 8 and 10(32-bit and 64-bit)
(It does not support Windows 95, 98, ME, and NT4 operating system)
Support Reflash chips by yourself dumps.

VAG/VCDS HEX-V2 19.6.1 multilanguage PCB:

1. Four-layer circuit board, high quality Components
2. VAG/VCDS HEX-V2 with FT232RQ + 16V8B + ATMEGA162
3. Dual 9241 chip ensures K-line communication stability
4. obd2cartool.com Exclusive CAN-FD (5M) , VAG/VCDS HEX-V2 support 5M baud rate communication


More information:
Whatsapp:+86-13537734676
Email: obd2cartool@hotmail.com
Skype: great2obd

Super Quality Digiprog 3 with FTDI Mileage programmer feedback

Digiprog 3 is the most popular Universal  Odometer correction tool, Latest V4.94 Digiprog 3 Mileage programmer works alone, no need laptop except for update.  super quality Digiprog iii 3 with FTDI is a cost-effective Mileage programmer, which supports multi-language and full range of vehicle. obd2cartool.com Super Quality Digiprog 3 with FTDI tested feedback;

How about obd2cartool.com HQ Digiprog III Odometer correction with FTDI?

Note: this pcb board have not add FTDI, but shipping out all with FTDI chip!!!

Audi:
Audi A4 2002 OBD OK
Audi A4 2001 1.9D with OBD OK
Audi A4 2005 OBD OK
Audi A4 2006 OBD OK
Audi A5 2008 OBD OK
Audi A6 c6 2004 OBD OK
Audi A6 2005 2.7D by OBD, first time read info but didn't write new values, second time OK
Audi A4 B6 RB4 Crypto OBD OK
Audi A6 4F 2011 OBD OK
Audi A6 c6 2007 OBD OK
Audi Q7 2007 OBD OK (first try didn’t change, second try OK)
Audi A8 D4 2012 OBD OK
Audi A8 2004 OBD OK
Audi A6 2010 dash via OBD, it takes a while to find code but successfully do it
Audi A3 2010 by OBD OK
Audi TT 2002 obd2 n8 is ok work
Audi S3 2002 obd2 is ok work
Audi A3 2002 obd2 is ok work
Audi A6 2002 ok after some effort.
Audi A4 2007 OBD dash read write ok
Audi A4 8e b6 2004 OK in 2 minutes
Audi Q7 2007 via OBD work
Audi Q72012 by OBD work ok

VW:
Digiprog do all Golf 4 without problem!!! And all golf 6 digiprog 3 clone work good for me till 2013 year
Golf IV AGR 1998 OBDII OK - dash fuse need to be pull out at the end of the procedure.
VW Golf 5 OBD OK
VW Golf 6 OBD OK
VW Golf 6 OBD OK
VW Golf 6 2008/12 OBD OK
VW Caddy 2012 OBD OK
VW Passat 2003 OBD OK
VW Passat 2005 b6 OBD OK
VW Passat 2006 OBD OK
VW passat 2011 OBD OK
VW Phaeton 2005 OBD OK
VW Touran 2011 OBD OK
VW Touran 2010 OBD OK
VW T5 OBD OK
VW Caddy 2013 done throw menu Golf 6 2012>
VW Touareg 2004 OBD ok
VW Polo, Seat Ibiza 2007 Magneti Marelli Motorola ST48 by points OK

Skoda:
Skoda Fabia 2004 OBD – OK
Skoda Superb 2006 OK
Skoda Octavia 2009 OBD OK
Skoda Octavia 1.9TDI (no DPF) 2009 facelift 77kw - OBD OK
Skoda Superb 2014 OBD OK
Skoda Fabia 2010 OBD, read? /write OK after second try

Toyota:
Toyota Avensis 2005 via chip OK
Toyota Avensis verso 2005 via chip OK
Toyota Yaris 2006 93c56, program chip OK.
Toyota Rav4 2011 via chip OK
Toyota Celica 2001 connector 04/02 OK

Mercedes:
Mercedes CL63 AMG OBD + Filter OK
MB E-class 2003 OBD OK
MB C-class 2009 OBD OK
MB E-class 2011 OBD OK
Mercedes CLS 2014 OBD OK
MB A-class W176 2015 desolder chip 95640 + can filter. OK
MB A-class W168 2003 OBD OK
Mercedes W251 R350 2010 OBD ok
no sync problems no can filter needed!
Mercedes Vito W638 2003 OBD ok
Mercedes B-Class W246 use direct in OBD ok
Mercedes w211 2003 read and Save cluster EEPROM via EEPROM / MCU ok

Ford:
Ford C-Max 2007 OBD OK.
Ford Fiesta 2007 OBD OK
mondeo 2008. big screen (color) OBD OK

Others:
Ferrari 458 Italia 2010 - OBD OK (1min)
BMW X3 2006 ST01 OK
BMW F10 OK
Vauxhall Vivaro 2010 93c66 chip OK
Vauxhall Vivaro 2013 93c76 chip OK (need to desolder chip. chip is easy to find at back of cluster, nearby connector)
Citroen Nemo 2008 ST01 OK
Citroen C3 BSI chip 95160 read/write OK (no need desolder) dash 93c46 chip OK
Peugeot 607 2005 BSI 95128 chip OK (Desolder), dash 93c66 OK (no desolder)
Renault Twingo 2013 by chip 96c66 OK
Kia Ceed 2008 with C56 – OK
Dodge Nitro OBD OK
Fiat Bravo 2007 OBD OK
Seat Toledo 2000 OBD OK
Honda Civic Type R (EP3 MY 2004) by EEPROM 93CS56 OK
Chrysler 300 C 3.0 Diesel 2007 OBD OK, but after odometer correction there is fault P242F for DPF filter. After DPF regeneration everything is OK.
Nissan Navara, Pathfinder Motorola ST48 by points OK
Fiat Ducato 2014 OBD dash ok
Mitsubishi galant 2006 93C46 ok
Saab 9-3 2009 HCS12 ok
Ford Mondeo 2010 Visteon dash with 9s12 read write ok via 4 wires on PCB
Peugeot 307 2002 —> Work Dash —> NEC (New ST59) BSI —> HC12
Passat 2013 by OBD ok
2014 Porsche Panamera by EEPROM 95640 work ok
2011 Vauxhalls Vivaro… 93c76…. All good… read and write
Opel Astra G 2001 OBD read? / write ok 10 seconds.
Opel Astra H 2006 – m35080 – work
Still will update ....

There have many other odometer correction tool support for different vehicels

More Information :
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

Why choose obd2cartool MB SD C4 Full chip SD Connect Mux Compact 4？

MB SD C4 as a dealer level diagnostic tool which equip all original functions. SD Connect MUX is most popular work shop tool special Mercedes Benz Scanner. MB SD C4 Multiplexer request after-sales service more often than other device. So before you decide to get one benz sd c4 multiplexer you would better to get super after-sales service.

MB Star C4 Wifi Sd Connect Mux C4 for Benz car truck 12v/24v Full Chip PCB C4

OBD2cartool.com Kindly note:

1.OBD2cartool only offer free after-sales service within 1 year warranty for the product order from us.
2.We do not free offer technical support for product from other suppliers, due to the quality different, much MB SD C4 multiplexer can only send back to supplier for repair.
3.If Customer need technical support for your MB SD C4 Multiplexer from Other suppliers indeed, just pay 39usd for each time, then contact Skype:great2obd for technical support.


Why choose high quality MB SD C4 from obd2cartool.com?

1. SD Connect Serial Number 100925(obd2cartool.com Kindly note: serial number 101923 or 101044 SD CONNECT may be locked when you update firmware)
2. Star Diagnosis SD Connect C4 firmware update available.
3. OBD2cartool.com offer online scn coding 1 year/1 time account for online programming function.
4. DAS/XENTRY Software from obd2cartool.com have Blask list path can help sd connect C4 mux avoid locked.
5. Full New Chips layout on PCB board which include UDS Chips which support scn online coding via dealer account.
6. All SDConnect will be power on and aging than 12 hours, and it will be tested 3 times with Ecus before shipping
7. MB SD C4 Mutiplexer have 1 year free warranty, we offer free after-sales service for device from us under warranty.


If need do online programming, please choose obd2cartool.com Star diagnosis C3/C4/C5 Online SCN coding mb star online SCN Code service

More details welcome find here:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

Super MB SD Connect C4 Star Diagnosis C4 XENTRY for Mercedes-Benz

MB SD Compact C4 Mux is the hot selling mercedes star diagnosis tool. MB Star SD Connect C4 Multiplexer newest 2017.9 mb star c4 software , support wireless connection and online/ offline programming. obd2cartool.com MB SD Compact C4 with full chips Mux MB Star SD Connect C4 Multiplexer For Mercedes Benz Cars and Trucks，it is support K line, CAN BUS, UDS protocol achieve all dealer functions..

MB SD Compact C4 Highlight:
1. Support Wireless
2. Software Version: 2017.09
3. Hardware Verison:  OS:2.3   CSD:2.8
4. Supported Multi-Language: Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/ Turkish/Czech/German/English/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese
5. Support Mercedes Benz Cars After Year 2000
6. Supports both online and offline programming, if want to do online programming obd2c have online Benz SD C4/C5 scn code for one time, one month.

Notice: China factory MB SD C4 Can Not work on IBM T30 Laptop, Super SD C4 can works with all computers.


3 Reansons to for obd2cartool.com Super MB SD connect c4:

Reasons 1: All SD Connect C4 will be power on and aging than 12 hours, and it will be tested 3 times with Ecus before shipping.
Reasons 2: obd2cartool.com also offer online scn coding 1 year/ 1 time/ 1 month account for online programming function.
Reasons 3: All SD Connect 4 main unit have 1 year free warranty, excellent after-service protect customers' benefit.


Super SD connect c4 highlight:


1. Original factory plan.
2. all new chips
3. support 108M NIC


MB SD Connect Multiplexer Compact 4 support reading out & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming. It support wireless diagnose, support K line, CAN BUS and UDS protocol, fit all computers, with multi-language. The new generation for Mercedes Benz SD connect c4 is the latest one on market for all current and new coming MB vehicles.


Mercedes sd connect c4 wifi improved advantages compared to old star diagnosis C4:


1)support UDS chip: Old MB STAR C4 doesnot support UDS chip, while sd connect c4 support UDS chip, besides support K line and CAN BUS;
2)MB SD Connect C4 support wireless diagnose;
3)1pc x LAN Cable: SD Connect C4 use LAN cable to connect, this means the computer without COM PORT is also allowed to work with SD connect C4.
4)SD Connector c4 adopt Military quick swap technology, it can support 10,000 times pull plug, more stable.


MB SD Connect C4 Function:


1. New MB SD Connect Compact 4 Star Diagnosis not only works with K line diagnose and CAN BUS,but also for UDS diagnose protocol.Old MB STAR C4 can not support these 2 functions,because old MB STAR C4 main board does not have UDS chip.
2. New MB SD Connect Compact 4 Star Diagnosis supports wifi diagnose.
3. Multiplexer supports Lan cable connection.
4. Connector adopts Military quick swap technology, so it can support 10,000 times pull plug, more stable.
5. All core accosseries adopt original new packing chip, 24hours test, product quality is guaranteeed .


More details:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Skype: great2obd

K-TAG V7.020 EURO KTAG 7.020 full components unlimted tokens Big SALE!!!

Ktag 7.020 Master is red pcb K-TAG ECU Programming Tool with full components. EU K-tag 7.020 K-suite 2.23 software inside high quality red PCB with Murata Filters. KTAG V7.020 EURO Ksuite V2.23 ECU CHIP TUNING supports ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, and so on, at least 100 more ECU Types added.

Now obd2cartool.com K-TAG V7.020 EURO KTAG 7.020 full components unlimted tokens Big SALE!!!  High qualtiy with lower price,  Do not wait until the black Friday shopping carnival, you can now get ahead of time!!!


K-TAG KTAG 7.020 EURO ECU programmer Function:

1. Mainly Different :  Our K-TAG 7.020 add a GPT cable to support GPT Functions
( GPT is new password algo cryptography that is implemented in new Tricore microcontrollers. red EU KTAG v7.020 can easily read and decrypt the secret password and it automatically unlocks/unprotects the Tricore sectors so it can read and write both Flash and Eeprom )
2. No reset button , No USB Dongle. No Tokens Limited!!!
3. Real version of KTAG 7020 EURO all Active version!!!
4. Full components no need rework!!

obd2cartool K-TAG V7.020 EURO PCB Show:

obd2cartool KTAG 7.020 Red PCB full components:
1.  Murata NFE61PT472C1H9L
2.  8x WFs = Infineon, BCR112 NPN Digital Transistor
3.  7x 27E = ON Semiconductor NUP2105LT1G
4.  8x 6DW = NXP BC817,215 NPN Bipolar Transistor
5.  3x A6c = MMUN2113LT1G / MMUN2113LT3G
6.  2x K5B = BC807-25-7-F PNP Bipolar Transistor


More details:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

What differences about EU Red kess 5.017 and ktag 7.020 Ecu programmer?

EURO red pcb Kess v2 5.017 and red Ktag 7.020 all Ecu Programming Tool, both with full components no need do rework. EU Red Kess v2 5.017 ECU programmer and Ktag 7.020 supports online full protocols ,fully activated,without tokens limited. which one better for you? there obd2cartool.com will share some points.

 Different Connection Way :
For Most Vehicles, Red EU KESS V5.017 can read and write ECU via OBD2 Cable Directly, Easy To Operate !
KTAG V7.020 read and write ECU via TRICORE or BDM Or Other Mode with special cable, Inside software will guide you how to operate.


For Vehicle Coverage :
 KESS 5.017 and Ktag v7.020 all can work For Most for Toyota Denso ECU Protocol, But only Red K-TAG 7.020 master full components can work For Toyota Hilux kun26 very well !

EU RED board KTAG V7.020 can support much more truck/tractor/motorcycle than KESS V5.017 , and Ktag V7.020 ECU chip tuning is more suitable work for 24V truck and tractor.


  KTAG V7.020 add a cable with GPT Functions.
 GPT is new password algo cryptography that is implemented in new Tricore microcontrollers. our KTAG v7.020 can easily read and decrypt the secret password and it automatically unlocks/unprotects the Tricore sectors so it can read and write both Flash and Eeprom

There is EU Red Ktag 7.020 Master best friend, BDM Frame With 4 Probes Dimsport work togeter will be fine!

More detail welcome find here:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

Recommend pefect VAGCOM 17.8 Deutsch/French update online interface

VAGCOM 17.8 Deutsch/French update online interface is arrived on obd2cartool vag diagnostic cable centre, Newer VCDS 17.8 DE/ FR cable use the official software and update online, so you can always get the newest software version.

DE/ Fr Upgrade version VAG COM 18.2.1 cable Features:


1. The cable use the official software and update online, so you can always get the newest software version.
2. You can get access to Internet with full active when using this interface .
3. This cable support long coding，fast scanning fuctions.
4. It supports Firmware update online ( not NEC project), always the newest version.
5. It with reset function


Vag com 18.2.1 DE / FR highlight:


1. Vag com 17.8 Reliable and durable products, support lower version like vcds 17.1.3/ 17.1...
2. While vcds 17.8 with Windows 2000, XP, Vista, win7, win8, win8.1 WIN10 the operating system compatibility (32-bit and 64 - bit), Does not support Windows 95, 98, 95, ME, as well as the NT4 operating system
3. Compared to the previous version, the  VAG 17.8 main changes is BUG fixes and improvements, support Windows10 system


There also have one cheap and Vagcom 17.1 full active VCDS 17.1 China crack VAG 17.1 For VW Audi Seat Skoda Stable as chair, Support reflash chips by yourself!!

More details:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

What's different about Mercedes C3 Multiplexer, MB SD Connect C4 And MB Star C5 Xentry Connect?

Star Diagnosis Tool is really preferred auto scanner For Mercedes Benz . obd2cartool.com recommend 3 version of Mercedes benz star diagnostic tool: Mercedes Benz star c3, MB Star SD Connect C4 And MB Star C5. There will Comparative analysis Mercedes Benz star c3 / Connect C4 / C5 for you.

How about Mercedes Star Diagnosis Tool: Mercedes C3 Multiplexer, MB SD Connect C4 And MB Star C5 Xentry Connect?


Mercedes Benz star c3 / Connect C4 / C5 Similarity:


1. Mercedes C3 Multiplexer, MB SD Connect C4 And MB Star C5 Xentry Connect use very same computer software.

2. For the hardware, Benz star C3/C4/C5 is exact same function in diagnosing.

3. obd2cartool.com support Benz star C3/C4/C5 SCN Code for one time , one month, three month.

What's different about Benz star c3 / Connect C4 / C5:


1. Functions: 
MB star c3 and c4 are almost the same, C4 can do all the functions with C3 does and could replacement of Compact C3.

Benz star C4 size is modest and lighter weight, much convience as well as potential is improved.  From buyer feedback, obd2cartool.com Mercedes C3 Multiplexer support do trucks perfect.

2. Support: 
MB star C3 just can assistance Mercedes Benz cars manufactured immediately after year 2000. Super MB star c5/ Benz SD Connect C4  can help all existing and new coming MB autos.
 

3. Update: 
Benz star C3 ,SD connect C4 update by Harddisk. Once do update, they need send back harddisk to supplier,  after finish update, then send back to them again or order one new HDD. It may need about 2 weeks for 1 time update, so it is extremely trouble and inconvience.

Beneath this situation, Super mb benz star c5 release, it is can update from super mb star official web directly, which will be significantly convenience and easy work.

Super mb star C5 perform with W204, W207, W212, 405, 451, 452 and 454. Besides the software c3 and c4, star C5 added 3 more software program: SD Media, Xentry and Clever TAN Code.

SD Media: Video and PDF lessons;
Xentry: New software program released by Benz Enterprise immediately after 04/2009 by diagnosis new automobiles. Xentry application for diagnosing W 204,W207 and W212 which C3 and C4 will not assistance;
Smart TAN Code: Opened special function in DAS program with Wise vehicles 405/ 451/452/ 454. In addition to additionally, it opened much more specific functions, for instance engineer mode, get rid of limitations,etc, which Star C3 and Star C4 don't have.


The most benefit of SD connect c4 : It could connect to Pc by wireless or Lan cable. So it will likely be a lot much more convience than Benz star C3 .


In addition to, Mercedes Benz star SD connect C4/ C5 interface components utilised the military speedily inserted procedures that can help one particular million times plug ; obd2cartool.com MB SD C4/ C5 all the its core components adopt new original packaged chip, plus 24 hours fatigue test, to make sure its stable release.

So in all, which one is most suitable and interested by you love, Benz star C3/C4/C5 each version have its benefit.

More details:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd