How to Program New Keys for Peugeot with Lexia 3 diagbox PSA interface

Lexia-3 PP2000 PSA interface with Diagbox V7.76 is obd2cartool professional diagnostic tool for Citroen and Peugeot. lexia3 diagbox supports read identification and read fault codes (for normal use) for most of Citroen and Peugeot vehicles from 1995,now support Peugeot 307! Here obd2cartool.com would like to show you how to program Peugeot new keys with Lexia 3 diagbox.

Attention: PIN Code is required during key programming procedure. Record your vehicle PIN code first.

Procedure to program Peugeot new keys:
1. Install and activate Lexia 3 PP2000 diagbox software.
2. Select vehicle model 307 and wait until the well communication built.
3. Check the entering vehicle information.

4. Select the application as “Peugeot Plant 2000” and confirm it.

5. Select test by ECU;
6. Choose “Built-in systems interface”;

7. The system is reading the ECU in progress, follow and accept the windows prompts.
8. Select “Learning” option under carry out the tests menu display.

9. Select “Programming of keys”;

10. The system will display key programming procedure when activation process is completed. Confirm to continue;
11. Confirm Unlocking the E.C.U program;
12. Manually enter the “Confidential code” (PIN Code).

13. The system is verifying the PIN code. If the code is correct, the built-in systems interface is ready for programming of keys;
14. Enter the key number to be learnt. The number of keys to be programmed cannot exceed 5.

15. Follow the screen prompt to switch off the ignition
16. Then switch ignition to ON within 15 seconds.

17. Key programmed, switch off the ignition and take out the key.

18. Switch ignition ON again and insert the next key in the ignition. Repeat the key programming procedure to program another key. When complete programming, the system will display keys that are programmed.

19. Follow the screen instructions. Check the handbrake is on. For an automatic gearbox, check the gear level is in position “P”. For a manual gearbox, check that the gear level is in neutral;
20. Follow the re-synchronies the HF remote controls procedure to operate until the “End of key programming procedure” notice displays. Exit the program.

Why choose Lexia 3 PP2000 Scanner Lexia3 diagbox with 921815C Chip

Lexia3 PP2000 Interface is obd2cartool professional diagnostic tool for Citroen and Peugeot. Since lexia 3 pp2000 scannner released, the customers like to purchase lexia 3 with 921815C for their Citroen Peugeot diagnosis. Diagbox PSA Interface is the best quality lexia 3 diagnostic tool in the market.


Lexia 3 PP2000 Scanner Lexia3 diagbox with 921815C Chip DiagBox PSA Diagnostic Interface

Lexia 3 PP2000 with 921815C Chip have two version:

Option 1: full chip with 921815C

Option 2: not full chip with 921815C


Full Chip Lexia3 is DiagBox PSA Diagnostic Interface PP2000 with 921815C Firmware. Chinese DiagBox PSA Diagnostic Interface works for Peugeot and Citroen vehicles. Nowadays, lexia 3 with full chip is only charged 75 usd for retail.

921815C Firmware but not full chip Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

And also we need to know,not full chip Lexia 3 pp2000 diagbox is cheaper,so have not same more function as full chip one,but it is very useful for Peugeot and Citroen vehicles.

PSA DiagBox Diagnostic program used by dealers for Peugeot and Citroen vehicles. It only works with the original and Chinese PSA adapters XS Evolution Lexia3 PP2000. You can do all as an authorized dealer. PSA DiagBox diagnostics software allows you to perform a complete analysis of all models from 1995 to present. Diagnosis is made through the OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Diagbox, Lexia3 and PP2000 Software supported multi-languages: English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai...

This article is shared by obd2cartool.com, auto diagnostic tool,Test socket adapter, key programmer,ic chip supplier, if you have any questions about lexia 3 diagbox  interface, please leave us message or visit our main site to contact us.



Wholesaler Discount:
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd

If you are wholesaler or reseller, pls send email to obd2cartool@yahoo.com, we will give you best discount for long-term cooperate.