T300 Key Programmer English / Spanish / Turkish T300 Chip Key Decoder
T300 v1.68 Key Programmer Install Steps:
For VW Transponder key matching with 5 digits Login Code
Procedure for adding transponder keys to vehicles with separate Immobilizer box:
(Golf 3, Passat B4, Transporter, Lupo, Sharan)
1) Switch ignition ON with new key.
2) Select: Immobilizer -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code). For example, if your Login is 1234, enter 1234 -> Save
3) Go to Adaptation
4) Enter 01 in "Channel Number"
5) Enter
6) Enter number corresponding to the total number of keys to be matched, The "Stored Value" is the number of keys currently matched. For example, Enter 2 -> Save
7) Switch ignition off and remove key
8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in "Channel Number"
11) Enter 0 and Save. This will learn ECU with Immobiliser.
Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:
(Golf 2004, Passat B5, B6 )
1) Switch ignition ON with new key.
2) Select: Instrument -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).For example, if your Login is 1234, enter 01234 -> Save
3) Go to Adaptation
4) Enter 21 in "Channel Number"
5) Enter
6) Enter number corresponding to the total number of keys to be matched. The "Stored Value" is the number of keys currently matched. For ex, Enter 2 -> Save
7) Switch ignition off and remove key
8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in "Channel Number"
11) Enter 0 and Save. This will learn ECU with Immobiliser.
