Best ECU programming tool Ktag + Kess + ECM TITANIUM V1.61

KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).

KESS V2 for programming directly through the OBD port of the vehicle, while Ktag need to take apart the ECU and open it, after that can make the read / write operation.

Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there also have lot ECU need to disassemble from the car and open  the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so choose with KTAG . obd2cartool.com will detail how feature from different items.


Why choose the Newest Master: Ktag 7.020 + Kess V2 5.017?


KTAG firmware 7.020:

K-tag 7.020 with newer 4 Probes Dimsport bdm frame works better, faster and more stable than old versions

Adds 100+ ECU types & supports new car models e.g. Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.
more languages available English, Italian, Portuguese, French, Deutsch, Spanish)
better wiring description (in words not pictures).


Kess v2 firmware 5.017:

Compared to KESS V4.036, the KESS 5.017 has been improved a lot:

1. 100% working
2. No tokens limited
3. with original database
4. Windows 7 & Windows 8 supporting, not only Windows XP
5. supports more cars & bikes & trucks unlimited tokens, fully activated


So, with Ktag v7.020 + Kess V2 v5.017, you can read and write ECU without token limitation for OBD, Jtag, BDM and Boot use for the new models and protocols. But it cannot be used for Tricore, there need go to MPPS V21 cables.


Why need with ECM TITANIUM V1.61?

ECM TITANIUM V1.61 Crack, No need activation and key


ECM TITANIUM V1.61 crack allows you to accurately and easily, autonomous and completely safe to interpret the files on Windows XP or Windows 7 in Italian/ English/ Portuguese/ German/ French/ Spanish, that are contained inside the motor controller. Through the use of Driver which true “contents” pose for reading the files contained in the control units, you can easily find the data stored in the file maps and the main rev limiter to increase the engine power, or simply the consumer to optimize.


18475 Driver:

The outstanding component of this product are its drivers the latest Generation. They offer a well-structured and functional powerful interface to create and manage projects in terms of the machined in ECM Titanium files. After the file contained in the memory of the control unit has been read, it is enough to load it. Then the software starts a search to check the presence of compatible drivers both in our personal as well as in the online database. Thanks to the studies of our developers, allows the software about to act directly on the main areas: control of air-fuel ratio, engine torque, injection system, Rail, Turbo and many other options are available.


Checksum work 100% fine:

It is a bit sequence that is used for checking the completeness of the data. Every time you interact with a single bit, interpreted and automatically corrects ECM Titanium the control sequence. Therefore, a successful course is guaranteed, no matter whether you work in real time or whether you need to send a file to your slave.

More ECU chip programmer tool welcome found here:
http://www.obd2cartool.com/ecu-chip-tuning-c-39_4

Where to found true WIFI samtec Piwis tester 2 piwis ii VCI?

Piwis Tester II is professional Diagnostic Tool For Porsche. Piwis Samtec Porsche piwis 2 interface can work with latest software v18.150. Piwis II VCI for Porsche is Samtec Hardware and the latest professional tester for Porsche,powerful functions,full access. but where to order one high quality Piwis 2 VCI with true Wifi function? Yes, there obd2cartool.com has good feedback one. 

obd2carool Samtec Piwis tester ii

Why buy Samtec VCI Piwis 2 from obd2cartool?

1. Original Semtec project interface, can update, not J2534 or bad clone can't update or locked (choose a best one will save your money and save your time!!!  got a poor quality one after 2-3 month broken, then should send it back to repair. it  will lost shipping cost, lost device for diagnosis, lost business!)
PS: Famous OBD forum mhh Cartechlogy AP recommended version!
2. Full access to porsche Development verison!
3. Version: v18.150 support 2017 Porsche cars
4. Bluetooth,GPS and Navigation Function are available. can modify in Engineer mode.
5. Certificate is well installed, our Piwis II supports Online Functions, only two functions need to work online: Teach keys immo function and Parts protection function.




Piwis II User Notice:

1. After finish diagnostic, please quit the connection, and quit to the homepage of the software, then shut off the laptop in correct way(DO NOT Press Power Button, otherwise the system will be damaged).
2. This Piwis2 we sell is best quality and it is Semtec Hardware, which is 100% same as the porsche dealer has, not J2534 hardware, the J2534 FTDI hardware comes with different PCB,  and it has no certification make it is not able work with all modules, not support online functions.

Piwis Tester 2 for Porsche Functions:

1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

PIWIS II Wifi for Porsche OEM Wireless Solution Released! The wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi signal is really strong.
For the piwis ii wifi settng, firstly you need connect the USB cable to laptop, then setting in [VCI Config] by inputing the SSID and Password of router.

TIPS FOR CONFIGURING THE PIWIS II WIFI ROUTER
Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN
Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)

More message also could found here:
https://goo.gl/XjEPy5

How to Install Crack VCDS 17.8 EN into PC?

VAG COM 17.8.0 ATMEGA162 Interface is arrived on obd2cartool vag diagnostic cable centre. VAGCOM 17.8.0 hex can usb interface with ATMEGA162 + FT232RL + L9637D + 16V8B. VAG 17.8 full active cable For VW Audi Seat Skoda,it is BUG fixes and improvements support Windows 10 system. Suggest off internet to install and do test!

How to Install Crack VCDS 17.8/18.1/18.2 EN into PC? there obd2cartool.com will share install guide to you.(same install steps as VCDS 21.3 release cable)


1. Install VCDS-FRM-17080-Installer.exe step by step.

2. When installation is successful, please don't run vcds release 17.8 software,  delete your Computer desktop VCDS Release 17.8 shortcuts .


3. Copy and paste CD program vcds (17.8) crack.exe into the installation folder(C:Ross-Tech/VCDS), Then generates vcds crack.exe shortcut to your desktop.


4.First time plug cable into PC, waiting a while, Run vcds_17.8.exe. click Options to do self test, then Save data.


5.Turn off all vcds software, plug into your car, then Run vcds_17.8.exe again,do test.



Note: please off internet, Release 17.8 is original software, do need use vcds crack.exe to protect cable not easy be block.

What more! There have another one cable work stable as chair VCDS 20.4.1 online update version 16 multilanguage

It supports 16 Languages.( Support 16 languages, including of Chinese, English, French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, Romania.)

Multi language Atmega162 VCDS Hex-v2 USB Interface VAG 17.8.0 support 5M baud rate communication, it is ensure the integrity and efficiency of data transmission.. 

DIY Atmega162 HEX V2 VCDS 21.3.0 full active cable For VW Audi Seat Skoda VAG HEX V2 support reprogramming, if you have dumps for vcds 21.3.0 other languages.

HEX-V2 VAG 17.8.0 stable version highlight:

Real Vag Hex v2 support for CAN-FD.

Support reprogramming newer language and version by your self.

High quality original brand new IC production

After installation has been activated to support all systems diagnostics (including K1,K2,CAN,UDS)

VAG HEX-V2 17.8.0 support 5M baud rate communication, it is ensure the integrity and efficiency of data transmission.

Any question welcome contact with us, we will do best to help you.
Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

ECM Titanium 1.61 is for remap car computer injection (ECU). Cracked ECM TITANIUM V1.61 allows you to edit the files stored inside the memory of the Engine Control Unit (ECU) accurately without any difficulty

Obd2cartool.com ECM Titanium 1.61 is ECU Chip Tuning software, enable you to remap your car computer injection (ECU) for more power engine, can work with kess v2 and ktag ecu programmer

ECM TITANIUM crack highlights top 6:
1) Crack version, do not need activation

2) No key needed

3) Exist all 26106 drivers

4) Work well on Windows XP and Windows 7

5) Checksum work 100% fine

6) Multi-language available: German/Italian/English/Portuguese/Dutch/French/Spanish

ECM TITANIUM V1.61 Installation Guide:
1. Open ECM Titanium software CD

2. Copy ECM FULL folder and paste it to Local Disk (C:)

3. Open ECM FULL folder

4. Send ECM Titanium software to Desktop (create shortcut)

5. Open Titanium shortcut

6. Click OK to accept WinLicense message

7. Click “Info” tab>> Lizenz ECM Titanium to check the software version

8. Click “Werkzeuge” (Tools) tab -> Sprachauswhl (Language selection) to change language

9. Software installation is completed. Start using ECM Titanium software.

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Most Suggestion: Atmega vcds v17.1 full active most stable vag com hex can interface

Most of customer would like to get a vagcom hex can cable which is good and stable. Here obd2cartool.com mostly suggest you this good plug and play vagcom vcds 17.1 full active hex can interface. Vagcom v17.1 full active from customer feedbacks is very easy to install and work well.

Vagcom 17.1 full active VCDS 17.1 China crack VAG 17.1 For VW Audi Seat Skoda

Why highly recommented VAG COM VCDS 17.1?

Software Version: VCDS 17.1
Firmware Version: 1.96
Supported Vehicle List: For AUDI VW SEAT SKODA
Chip Edition: ATMEGA162 + FT232RL + L9637D + 16V8B
System requirement: Windows XP, Vista, 7, 8 and 10(32-bit and 64-bit)
High quality original brand new IC production, With the upgrade brush program interface
After installation has been activated to support all systems diagnostics (including K1,K2,CAN,UDS)

FAQS:

Q: How to solve vagcom 17.1 interface not be found?
A: When you install software, please not run software first! Connect VAG cable to the PC, then run your software!


Q: Why vcds vagcom 17.1 hex can interface come this issue?
A: Atmel chip need read your software and Calculate the code.


Q: Atmega vcds 17.1 support online update?
A: Hi, this Atmega vag com 17.1 need reprogramming by yourself, or could check this online one:  https://goo.gl/qGWXpw