Knowledge of the common models about eMMC/eMCP IC test socket adapter!!

Knowledge of the common models about eMMC/eMCP IC test socket adapter!!

For Card Nand Flash Test Solution, FBGA169 / FBGA153 IC Burn-in / Function Test Socket, (11.5x13,12x16,12x18,14x18mm) specification eMMC / eMCP IC test socket.
http://www.obd2cartool.com/index.php?main_page=advanced_search_result&search_in_description=1&keyword=emmc+169

USB Interface output and SD test socket adapter.

Features:
1. Using the standard SD interface mode, SD connection or through the programming interface to achieve the appropriate operational test or the like through a card reader and computer programming;
2. Compatible with the ball without the ball test, IC uses a mold forming one bounding box, you can select different sizes of the bounding box to be replaced according to IC, IC can achieve different sizes General;
3. Support hot-swappable, support should be tested connected PIN via the SD interface or through a link on the board for the discharge;
4. PCB 4-layer wiring structure, reduce the use of the product in the test due to signal interference caused by unstable phenomenon, finger-thick gold plating process to ensure durability and exposure of use;
5. Also compatible with: Toshiba, Samsung, Hynix, Intel, Sandisk (SanDisk) and other brands IC
6. Beryllium copper shrapnel imported high-precision molds by stamping, head-shaped imitation probe design, late and hard, thick gold plating process to ensure product stability and durability;
7. The connection module with the overall structure, reduce duplication locate problems and ensure their points of contact with the IC PAD precise alignment, the first test pass rate;
8. Using through-hole solder structure to ensure good contact, SOCKET and PCBA accurate positioning using the positioning hole easy to replace;
9. Clamshell structure, easier manual testing, convenient and simple to operate;
10. Using the overall shape of the mold plus spring adaptive structure, to ensure that different thickness of IC does not require any adjustment to ensure good contact IC test universal wide (thickness 0.6-2.0MM range can be tested);
11. A structure using injection molding, precision positioning, pick and place convenient IC, work more efficiently;




Pitch e(mm) Pin Cout PackageSize(mm) Part Number
0.5      153/169   11.5*13         eMMC 153 / eMMC 169
0.5      162/186   12*12 eMCP 162 / eMMC 186
0.5      153/169   11.5*13 eMMC 153/ eMMC 169
0.5      162/186   11.5*13 eMCP 162 / eMMC 186
0.5       30   11.5*13   eMMC 153/ eMMC 169
0.5       30     12*16   eMCP 162/ eMMC186
0.5       30   11.5*13     eMMC153/169
0.5       35     11.5*13 eMCP162/186
0.5       30   11.5*13 eMMC153/169
0.5       35   14*18 eMCP162/186
0.5       30   12*18 eMCP162/186

Do you know something about Clone KESS V2 ECU programmer

Have you ever bought clone kess v2 master ecu programmer? or any experiences with clone Kess V2? NOW,obd2cartool.com share some ideas about New Clone KESS V2 ecu programmer from our friends. from them get our kessv2 kess v2 is good working well, remove the tokens limitation,

Q: When i install the software, do i need to connect the internet?
A: Please DO NOT connect the internet when you install the software or use this device. Otherwise it will prompt you to update the software when you open the software. This software cannot be updated for now. If you click the update button to update the software, then it will has problem. If you do not connect the internet when you install the software or use this device, then it will not has this prompt.
So please do not connect the internet when you use it.


Q: Can i use KESS V2 to the ECU programmer for motorcycle or not?
A: There is such an option on kess v2 software, but we do not test it.


Q: kess v2 brings cartografias modified power increase?.
A: Our kess v2 only have read and write function, does not have other special function. It cannot increase the power. if you want to do special function such as change the data, promote the motivation, you need to buy this software from other place. or send it to professional engineer to modify.


Q: This kess v2 is master or slave?
A: Our kess v2 is master version.


Q: KESS V2 has the function of ECM Titanium?
A: Kess v2 can be used together with ECM Titanium. Not kess v2 has this function.


Q: Fgtech galletto V54 and kess v2, Ktag ecu programmer which one is better?
A: Both of them can work on a lot of ECU type. The way they work on the car are different. Fgtech v53 can work on trucks, while kess v2 have two kinds kess v2 car or kess v2 truck . FGtech v53 has BDM function, kess v2 does not. Kess v2 has mediation module, and is better to work on new encryption car.


Q: If i update the kess v2, what will happen?
A: Do not update it when you use. If you update it, then the main unit will be broken. You need to change the new chip. 18 USD/SET, not including the shipping cost. If you can change it by yourself, we will send the new chip to you, if you do not know how to change it by yourself, please send the main unit back to us, we will change it for you and send it back to you.


Q: I was about to order the Kess V2 but a friend told me that it gets locked after 30 flashes. It is posible that it is a software problem and that it is needed to reinstall the software or will the Hardware get locked?
A: I can assure that the kess V2 you mentioned are not made the same factory as us, it only has 30 tokens. Our KESS V2 will not be locked after you use 30 times.


Q: What is the difference for KESS OBD Tuning Kit(SE31) and KESS V2 OBD2 Manager Tuning Kit (SE87)
A: For SE31, it only support OBD mode, for se87, it support OBD and Boot mode.


Q: I use kess to read the car, but it gives me " wake up error " prompt. How to do now?
A: Do not use anti-virus software. You can use the two way to solve:

1)There is the TF card for kess v2, copy the software for TF card to other place, then format the TF card. Then recopy the software to your TF card. Then you can use kess v2 normally. Where to find the TF card? See the main board, the side with the biggest chip. The biggest chip is the token chip. You will find the TF card at the left bottom of the board.

2)Use the fix tool to fix it first. They way same as the tokens programming.
The detailed steps is included in CD,


Q: Can you tell me where to buy the map for various car?
A: For different cars in different place, its oil quality will be different. the corresponding map is different. Unless you use the ECU programmer to read the MAP out, then send it to professional engine changing company to customized. Otherwise, some MAP file bought directly still cannot use.


Q: What is the difference for supported working mode for KESS V2, K-TAG and FGTECH V54?
A: Fgtech v54 support OBD, BDM and BOOT. K-tag support BDM and BOOT. KESS V2 support OBD and BOOT.


Q: Can i use KESS V2 on laptop with WIN7 System? What about XP?
A: This software can be used on many win7 system, but not all, some laptop install other software that is not compatible with this software, will cannot run successfully. For XP, it can run on most XP.


Q: Where to find the user manual for KESS V2 V2.06? I need to know how to connect the cable with ECU.
A: When you open the software, you will find the help folder. Open this folder, you will see the user manual