Friday, December 23, 2016

Car pixel repair ribbon cable for MID SID OBC dead pixel repairs

Several car models have the commond dead,fading or completely disappearing LCD display pixel problem on the instrument cluster and on the board computer(OBC)LCD display that shows valuable data such as the mileage,temperature,time and the OBC messages.the LCD pixel problem lies with the ribbon cable(also called flexible cable,flat cable)that connects the OBC LCD display to the circuit board of the instrument cluster or the MID/SID unit.SO the replacement of the ribbon cable to car pixel cable fixes the problem permanently.


www.obd2cartool.com

What Causes Dead Pixels?
There are a number of types of dead pixels, as well as ways to fix (or not fix) them. Let's obd2cartool.com show the possibilities.

Three sub-pixels make up one pixel—one for red, green and blue, respectively.
Dark dots: These are caused by dead transistors. Unfixable.
Portions of pixels are the wrong color or otherwise displayed improperly: A partial sub-pixel defect from the RGB film layer being cut improperly cannot be fixed.
Bright dots: This is caused by a wonky transistor that allows light through all of the sub pixels, or none of them.
Nothing is on the screen: This is caused by the monitor not being plugged in!


Good repair solutions that will save you hundreds to thousands of dollars over buying an OEM replacement part. Removing your faulty auto part is relatively easy that almost anyone can perform with simple tools.
www.obd2cartool.com
www.obd2cartool.com
       
www.obd2cartool.com
       

Electric Soldering Iron with rectangular cover(T)--40W

This is the special T-Iron for replacing pixel cable. Pixel repair (flat cable) is to replace the digital panel, which is within the instrument panel. It is glued with a soldering iron with a tip (T) with the teflon base not to burn the flat cable, is taken from the old flat cable and sticks to the new with the soldering iron with teflon base. Note: Remember to remove the paper that comes dressed in new flat cable
www.obd2cartool.com

There are obd2cartool.com some pixel repair cables:

Mercedes-Benz C-Class W203 LCD DISPLAY C200 C230 C240 C260 C320, Replacement damaged LCD display for Mercedes Benz W203 Instrument cluster.

AUDI A6L C6 VDO LCD Display is lcd repair pixel cable for audi 2005-2009 dashboard instrument cluster repair. A6L C6 instrument cluster repair cable is suitable for 2005-2009 year for AUDI A6L/C6. New released audi A6L C6 VDO LCD Display pixel repair cable.

For BMWcar E38 E39 E53 X5 SPEEDOMETER PIXEL REPAIR RIBBON CABLE

Ribbon Cable For Opel Corsa / Meriva Instrument Cluter, Opel Corsa Meriva Instrument cluster pixel repair, New flexible cable for Opel Corsa Meriva Instrument pixel error repair.

Ribbon Cable for BMW E31 18 button and E36 8 or 11 buttons OBC computer, New ribbon cable for BMW E36 3 series, E31 8 series, OBC (on-board computer) pixel repair. BMW E31 / E36 MID computer Pixel Repair.

Saab 9-5 ACC Flat LCD Connector Ribbon is Saab 9-5 ACC pixel repair ribbon cable. Saab 9-5 ACC pixel repair ribbon cable can support dead pixel repair. wholesale Saab 9-5 ACC LCD flexible cable.

SID1/SID2 Ribbon cable for SAAB 9-3 and 9-5 models is SAAB SID1 Display Missing Pixel repair tool. SID1 pixel repair is the version 1. SID1 pixel repair is high quality dead pixel repair ribbon cable for SAAB.

Thursday, December 22, 2016

Key DECODER Key PICK TOOLS and Key Cutting Machine for locksmiths

Auto lockpicks come in many shapes and size as well they must. Any auto locksmith could tell you how difficult it is to pick a lock without a pick of the right size. Different locks require different tools, and a locksmith must stock up on different picks in order to be prepared for any emergency.Here obd2cartool.com show how crucial the right equipment is for a locksmith.

Universal Lishi DECODER 32pcs Lishi Locksmith Tool Lishi PICK TOOLS



Sided groove: 14pcs Lishi 2-in-1 DECODER / PICK TOOLS  + 2pcs new HU162T (9) / HU162T (10)
Inner Groove: 16pcs Lishi 2-in-1 DECODER / PICK TOOLS

Full list:
1 LISHI HU64 (Ignition Adjusted) For DODGE, CHRYSLER, VOLKSWAGEN, MERCEDES-Benz....
2 LISHI HU66 (Ignition Adjusted) For Audi, Ford, Porsche, Seat, Skoda, Volkswagen, Porsche...
3 LISHI HU83 2-in-1 Auto Pick and Decoder for Citroen and Peugeot...
4 LISHI HU92 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for BMW, Mini, Land Rover, HUF...
5 LISHI HU100 (Ignition Adjusted) V.3 2-in-1 Auto Pick and Decoder for Opel/Buick/Chevy..
6 LISHI HU101 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for Ford, Jaguar / land rover Volvo...
7 LISHI HU100R (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for New BMW, Rolls Royce...
8 LISHI HY22 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for HYUNDAI and KIA..
9 LISHI HON66 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for Honda...
10 LISHI TOY2 (Ignition Adjusted) track 2-in-1 Auto Pick and Decoder for Toyota...
11 LISHI TOY48 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for TOYOTA...
12 LISHI VA2T (Ignition Adjusted)  2-in-1 Auto Pick and Decoder for Citroen and Peugeot
13 LISHI SIP22 2-in-1 Auto Pick and Decoder for iat / Ferrari / Maserati...
14 LISHI HU162T (9) 2-in-1 Auto Pick and Decoder for New VW, Skoda...
15 LISHI HU162T (10) 2-in-1 Auto Pick and Decoder for New Audi..
16 LISHI CHANGAN 2-in-1 Auto Pick and Decoder
17 LISHI HU49 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder For Jetta santana, Audi, Seat, VW...
18 LISHI HU87 2 in 1 Auto Pick and Decoder for Vauxhall/Opel, Suzuki, Nissan and Fiat
19 LISHI NYN11 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for HYUNDAI and KIA..
20 LISHI HYN7R 2-in-1 Auto Pick and Decoder for HYUNDAI and KIA for HYUNDAI and KIA..
21 LISHI HY15 2-in-1 Auto Pick and Decoder for HYUNDAI and KIA...
22 LISHI HY16 2-in-1 Auto Pick and Decoder for HYUNDAI and KIA...
23 LISHI HY17 2 in 1 Auto Pick and Decoder for HYUNDAI and KIA...
24 LISHI NSN14 2-in-1 Auto Pick and Decoder for Nissan and Subaru...
25 LISHI TOY43AT 2 in 1 auto pick and decoder for TOYOTA....
26 LISHI TOY43R 2 in 1 auto pick and decoder for TOYOTA...
27 LISHI MIT11 2-in-1 Auto Pick and Decoder for MITSUBISHI, PROTON, CITROEN, EAGLE...
28 LISHI MAZ24 2 in 1 Auto Pick and Decoder for Mazda...
29 LISHI CY24 2-in-1 Auto Pick and Decoder for CHRYSLER
30 LISHI FO38 (Ignition Adjusted) 2-in-1 Auto Pick and Decoder for Ford, Lincoln,
31 LISHI DWO4R 2 in 1 auto pick and decoder(8pin) for Buick (LOVA/Excelle/GL8) Chevy...
32 LISHI MIT8 2-in-1 Auto Pick and Decoder for MITSUBISHI....

Note:
Lishi 3-in-1 DECODER / PICK TOOLS is the new range of true Ignition adjusted tools, that will open doors, trunks and ignitions, with Ignition Adjusted remark, it is 3-in-1 Tool.

Key Cutting Machine Car Key Cutting Copy Machine For Making Keys locksmiths



Key Cutting Machine Multifunctional steel fixture, can copy various hollowness type,wave type,cylindrical key and key for multi lock and composite bead keys and car keys,such as BMW,HONDA,Volkswagen car keys.

Multifunctional Vertical Key Duplicating Machine
Portable machines with horizontally moving the handle feed
Can copy various dimple-shaped, wavy, cylindrical and picture-ball key.
With hardened ball bearing slide mechanism.

Tuesday, December 20, 2016

How many kinds Adblue Emulator for Truck and heavy vehicles

Adblue Emulator very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system. here obd2cartool.com will list How many kinds Adblue Emulator for AdBlue systemand Truck and heavy vehicles .


1.VD400 ADBLUE Emulator 8 in 1 with Nox Sensor


VD400 AdBlue Emulator Box designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4 and EURO 6 exhaust emission rates made by MercedsBenz, MAN, Scania, Iveco, DAF, Volvo,Ford and Renault.

2. Adblue 8 in 1 Truck Adblueobd2 8in1 Emulator with Nox Sensor

This one is old version as VD400,Cheap Adblueobd2 8 in 1 Truck Emulator is together with Programing Adapter designed. Truck Adblueobd2 8in1 Emulator supports for Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault and Ford.

3. Adblueobd2 Emulator for RENAULT/SCANIA/DAF/VOLVO/BENZ/IVECO/FORD/MAN Trucks
A. Adblueobd2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
B. Adblueobd2 will override Adblue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
C. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
D. Adblueobd2 does not damage the engine and not cause any negative effects to the truck factory setting.
E. Adblueobd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.

4. 9 in 1 Adblue Emulator adblueobd2
9 in 1 Universal Ad-blue Emulator Vehicle List:

Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault, Cummins, Ford
Support Trucks, Buses and Other Heavy Vehicles with EURO 4 and 5 Exhaust Emission Rates

5. Man EURO 6 AdBlue Emulator 
AdBlue emulator EURO 6 Man EURO6 AdBlue Emulator is Original, unique, and professional AdxBlue (SCR) emulators for DAF/VOLVO/SCANIA/MAN trucks and other transport.

EURO6 AdBlue Emulators Disable system:

– AdxBlue system (Fully)
– AdxBlue NOX sensor
– DPF system
– DPF temperature sensors
– DPF regeneration

After installing Euro6 emulator, you can remove:

– DPF sensors – YES
– NOx sensor – YES (only in DAF don’t remove first NOx sensor !!!)
– Adblue temp. sensor (s) – YES
– Adblue pump – YES
– Adblue level sensor – YES
– Adblue ECU – YES

Friday, December 16, 2016

iCopy 3 RFID Smart IC ID Card Duplicator iCopy3 for Locksmiths

iCopy 3 for Locksmiths support Smart IC ID Card Key Copying Machine with Full Decode Function, iCopy 3 RFID NFC Copier IC/ID Reader and Writer Duplicator.

iCopy 3 RFID Duplicator Smart IC ID Card Key Copying Machine


iCopy 3 Supported Blank Copy Cards:
It supports almost all blank copy cards,including UID, FUID,CUID,ZXUID, EUID, ICUID, E5500, E5550, T5577, EM4305, EL8265, 5200, 6200, 7200, 8200, 6608, 6609, 7325, 4366, 8348, 9823, 9834, ID435, 2346 etc,it will be updated and supports more smart cards in the future. 


iCOPY 3 Supported Smart IC ID Card: 

IC, MF1, S50, S70, ID, TK4100, EM4100, HID26, HID35, HID37, GID64, GID50, GID40, GID32, GID16, SID64, SID50, SID40, SID32,125KHZ-13.56MHZ;

It supports hundreds of smart cards including Asia, Europe, America, Southeast Asia, Affrica, Australia etc, it will be updated and supports more smart cards in the future.

iCopy 3 RFID Characteristic:
1. Full decode function,breaking the IC card to encrypt the whole defense.
2. Automatic stepless full frequency sweep,so that offset frequency card can not hide.
3. Built-in password database and upgrade procedures,has unlimited potential.
4. Support mainland China,Taiwan,Europe,Southeast Asia,ID/IC Smart Card.
5. Built-in lithium battery/full-color large screen/voice prompts,the best user experience. 

Monday, December 12, 2016

Super quality MB SD C4 Connect Compact C4 XENTRY for Mercedes-Benz

Since Yanhua Mercedes star diagnosis Compact 4 end of life, many customers may confused where to get the super quality SD Connect multiplexer. Now obd2cartool.com will sharing Mercedes star diagnosis Compact 4 China super quality MB SD Connect C4 XENTRY for Mercedes-Benz.

Super quality MB SD C4 Connect Compact C4 Star Diagnosis XENTRY for Mercedes-Benz

Why said obd2cartool.com MB SD Connect C4 multiplexer is super quality

1. Full New Chips.
With Others MB sd connect c4 don't have full chips, so they cannot support all modules. and some MB sd connect c4 factories plant old used chips, so their C4 not work well for sometime.

2. SD Card Port
Low quality SD Card port is not real square, there just a hole.

3.Good Protect for LCD modul
Low quality MB SD connect C4 LCD has not protect well for their cables, so many customers need to replace new LCD.

obd2cartool.com detail How to distinguish quality about China Mercedes star diagnosis Compact 4 .

1.For Serial Number:
In fact, the serial number can be changed by some technician, so it is no useful for our decision.
Note: Serial number 101044 has locked, it cannot work with the new MB SD Connect c4 software.

2. WiFI Card:
Wifi card also can not help us. Not all low quality sd connect c4' wifi card with bad quality card.
In fact, mostly of sd connect c4'wifi card has shell now and work well.And all MB SD C4 factoies' WiFi card is changing.

3. Look care of PCB Picturces:
This is the most important point to help us choose a good quality sd c4.





How obd2cartool.com make sure MB SD Connect Mux can work stable to you:

1.All MB SD Connect c4 will be power on and aging test than 12 hours when from factory.

2.All MB SD Connect C4 will be tested some times with Mercedes ECUs before shipping.

3.All MB SD Connect C4 main unit have 1 year free warranty, excellent after-service protect customers' benefit.

https://www.facebook.com/obd2cartool001

Friday, December 9, 2016

New ds150 with 1N4148 diodes can work for BMW car!! Only $30!!

New DelphL ds150e CDP+ TCS WOW vci is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old and new vehicles. obd2cartool.com device Simply connect DelphL ds150e diagnostic tool to the diagnostic socket in the vehicle and will communicate with the diagnostic software installed on your PC.

This 2 panel ds150 some clients said if contact with BMW car, like BMW E60 will not work,so what issues on it?

From obd2cartool.com a genius clients test, Found the reason there is 5V instead of V-bat on pin 7 are 5.0V Zener diodes D701 and D703 - Just replace those with regular diodes! No need rework again.

Replace those 2 diodes with 1N4148 100v/200mA diodes will work on BMW E60/61


Work on BMW or Trucks replace the two diode... number: D701 + D703  put in place : sillicium universale diode 1N4148 to work on BMW.

For obd2cartool.com more details information, welcome to Add my Whatsapp (+86 13537734676) or Skype (great2obd) if you have, Your Private Secretary in Car Repair Area!

Tuesday, December 6, 2016

New Renault-COM BT Diagnostic and Programming Tool Replacement Renault Can Clip

Renault-COM Bluetooth is dealer level diagnostic and programming advanced device for Renault vehicles. Renault-COM can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS. It can display identification, read and clear fault code memory, display and record measured values and perform actuator tests.There obd2cartool.com will detail about Renault-COM BT Diagnostic and Programming Tool Replacement Renault Can Clip!



Renault-COM Hardware:
Our OBD2 to Renault-COM interface contains eight piceses of ISO9141 K-Line, one piece of ISO9141 L-Line, CAN-BUS and analog measurement circuits.


Renault-COM Special Functions
perform dealer level high-end programming/coding such as:

Key programming
Service reset
DPF (Diesel Particulate Filter) regeneration
EGR (Exhaust Gas Recirculation) self-test
Airbag programming
Injector programming
Power Steering calibration
ECU replacement
Car configurations

Renault-COM Main Features:

Fully multiplexed all-in-one Bluetooth interface
Automatic ECU recognition
Automatic vehicle scan
ECU Identification: – finds all the available ECUs in the car by pressing the single button
Bluetooth – wireless connectivity to your Windows laptop or tablet
Fault code (DTC) reading
Fault code clearing, with the ability to store DTC vehicle history forever
Freeze frame reading
Measured values / live data Live data recording, fully dynamic with graphing of up to 6 data streams at a time, recording and other manipulations
Diagnostic protocol printing
Actuator tests, test components via direct ECU access

How to activate TOYO Key Pro with CN900 Mini/ND900 mini for Program Toyotda G Key?

TOYO Key OBD2 can be used together with CN900 Mini/ND900 mini. obd2cartool.com TOYO KEY OBD II TOYO PRO Bluetooth interface work with Smart CN900 Mini/ND900 mini to do toyota all key lost for Toyota G & H Chip.

How to activate TOYO Key OBDII to work with CN900 Mini/ND900 mini in order to Program Toyotda G Key?


Before programming Toyota G all keys lost, you need to activate and register TOYO Key OBDII with CN900 Mini.


Step 1: Run Upgrade.


Connect CN900 Mini/ND900 mini with laptop and update software to latest version (current 1.20.2.15 )

(Note: If the update procedure failed, disconnect and re-connect to update till succeed)

For Connect CN900 Mini with TOYO key pro :



Power on CN900

Select OBDII Comm (Communication) on main menu


Step 2:

Select 72G IMMO Reset

CN900 Mini will require to enter activation code


Step 3: 

Please follow these steps:

After you receive the TOYO KEY OBD2, take a full photo screenshot of the activation interface

Send your photo to our customer service. Our engineer will register the OBD with CN900mini for you.

Then customer service will send you the activation code to activate it.


Remark:

One activation code can just register one CN900 mini machine and can be activated for once only. Cannot work with more other CN900 machines. Do follow above tips to register CN900 Mini. If you do not follow these guides to register, we are not hold the responsibility if you damage your machine, freight and maintenance costs are on your account.

Thursday, December 1, 2016

How do setup New Chrysler witech micropod 2 Chrysler VCI 2?

New Chrysler VCI Micro Pod 2 with V17.02.3 Mopar micropod 2 software. New witech micropod ii V17.02.3 features Sustainable synchronization updates, can be networked, can work online with server. Now, obd2cartool.com sharing New Chrysler witech micropod 2 Chrysler VCI 2 how to setup power Guide.


New Chrysler witech micropod 2 Chrysler VCI 2 obd2cartool.com Guide:


ESSENTIAL: Once that New Chrysler witech micropod 2 VCI is actually set up with the microPOD Set up Power, the many microPOD Instant Settings shall be wiped. obd2cartool.com will require you to follow that guidelines in the KB website entitled “How to configure any Instant Page for a microPOD II”.

To obtain the required forms, please get access to Dealer CONNECT > Service > wiTECH Details > witech micropod ii Set up Power

Step 1th: Select “Run” to begin with that getting it approach to microPOD Set up Power.
Step 2th: That deploy sorcerer will may actually deploy that wiTECH Car owner x64 in your personal machine in case your LAPTOP is not established by using wiTECH one particular. 0 use.

If the LAPTOP continues to be established by using wiTECH one particular. 0 App, you won't need to notice that tv screen down below in addition to proceed to Stage 6th. Usually, click on “Next” to commence.
Stage several: Learn that License Contract carefully, in addition to acknowledge that conditions in the license contract. Then, click on “Next” to stay.

Step 4th: You're right now ready to get started the exact set up in the car owner. You right now must select “Install” for it to begin with.

Step 5th: This will likely right now deploy that wiTECH Car owner x64. Once complete, this program will on Autel Tools-pilot proceed to another stage.

Step 6th:  Once that New witech micropod 2 set up offers finished, click on “Finish”.  Proceed to the examples below segment, “Using that microPOD Set up Utility”.

If want cheaper offline version please check this one WITECH MicroPod 2 For Chrysler OEM wiTECH VCI POD2 with HDD

obd2cartool.com specialty at eMMC Test socket adapter,key programmer,smart key part,locksmith tool,odometer master,Ecu chiptuning...

Tuesday, November 29, 2016

How to Set WIFI For Volvo 88890300 Vocom interface

Volvo 88890300 Vocom Interface for Volvo/Renault/UD/Mack Truck Diagnose With WIFI Support Online update. Volvo 88890300 Vocom Interface was developed to make repair shop tasks easier and more efficient. 88890300 Vocom can be used in the repair shop, out in the field, at the roadside, or during test drives.  obd2cartool.com detail how to set wifi function.



How to Set WIFI For Volvo 88890300 Vocom interface:


1. Use USB cable ,  go to ptt , setting, Communication unit configuration , configure, 'USB+Directly to Communication unit'

2. 'Direct' ->'Restore default values'-'Apply'-'Ok'

3. Click Ok again.  then disconnect usb cable,

4. Go to Setting->'Comm.unit Selection' -. ' Communictcation unit 8889300 ....Nickname'

5. Now your can use signal get wireless singal.

All ok

Thursday, November 3, 2016

How do you know VPECKER Easydiag Scanner?

Since VPECKER Easydiag is well received, more supported vehicle and more special functions (i.e Battery configuration, ABS Bleeding, EPB, Oil Reset, TPMS reset and DPF (including Replace Diesel Particulate Filter and Regeneration Diesel Particulate Filter).what's the detailed about VPECKER Easydiag OBD2 code reader? obd2cartool.com got message from clients.


VPECKER Easydiag Scanner review on real vehicle:

On Kia Cerato petrol
Tested VPECKER Easydiag on Kia Cerato petrol, and finally some result, it haves options like launch idiag only one function is not there and that is brake fluid bleeding, all the rest functions are the same.
So far all cars that I have tested this one is the first one that haves some extra functions…

On VW Golf MK IV 1.9 tdi
I have tried VPECKER Easydiag on VW Golf MK IV 1.9 tdi, haves a lot of functions, this time even more then launch idiag, it haves even guided function, and a lot special functions, and login, taht is the first that vpecker works even better…

On ASTRA J 2011 1.7 cdti wroks ok
I have tested VPECKER Easydiag on ASTRA J 2011 1.7 cdti wroks ok, haves special functions not a lot but ok.But it works until 2011.
2.live data, service reset on BMW 530d E60
Tested vpecker ver.6.3 on BMW 530d E60 engine connect, but only read/erase fault code and live data, service reset.

3.Injector coding on Toyota models
Vpecker can do injector coding for a part of Toyota models.

4.From injectors to the wipers on many different cars and trucks
I got mine Vpecker today used it on a 2007 jeep…it did everything I needed it to do and more bi-directional on a lot of test from injectors to the wipers many different cars and trucks it works on ,it’s a lot better than most clones.

5.OK on 99% of cars
I have had Vpecker for about 2 months, wifi version and it has worked on 99% of cars I have put it on was looking at buying a clone autocom or delphi but for the same reason as a previous post liked the idea of original unit and software , had no problems setting up . Will talk to my pre 2000 Mitsubishi magna which is problematic even for our scanners at work & my early gu diesel which is not obd2. Every scanner is different we have a total of 6 different scanners at work each does different things better info on different models between then. For the price you can’t go wrong a lot of functions even some that our others don’t have but there isn’t the one perfect scanner for all models


6.Compared with Launch X431 Easydiag
I have tested and compared today wireless vpecker scanner and launch Easydiag on Mazda 6 GH 2.0 diesel 2008 year.
To be honest launch have a lot more options on that car then vpecker, for example on engine it can only read few parameters and it can read and clear trouble codes that’s it nothing else on engine not even DPF regeneration, idiag have a lot more to offer for that car.

1.Better at special function
What it can do more with special functions its for Toyota, Honda, Scion. But since it is original interface and software price is ok for it, the only question is how will it work with updates, because there a lot of brands that is working until 2013,launch is working for all cars until 2015.

1.Faster than launch
So for now vpecker is good because it is even faster than launch and original for good price, but not even close to delphi or launch because of the functions that it cannot do.
And one more thing, for example there is no Croatian or Serbian Language.

In summary:
VPECKER Easydiag scanner has lot special functions on some car models compared with other multi-brand diagnostic tool and all updates remain at vpecker official site http://www.tdintel.com/

Message from www obd2cartool com, More information welcome contact with us:

Tuesday, November 1, 2016

What about Nissan Pin Code Reader F102 and NSPC001?

OBDSTAR Pin Code Reader F102 is similar with NSPC001 for Nissan ,Nissan Automatic Pin Code Reader is appropriated for reading Pin Code, obd2cartool.com will show you some difference between them and come to a conclusion for you reference.




Features & Functions    F102   NSPC001 
Support to read BCM codes of all Nissan/Infiniti cars.
Can transfer 5-digit code to 4-digit code and 20-digit code to 20 digit code.
No need to connect with computer, plug and play, automatic transfer.
Program Keys for most of Nissan/Infiniti cars.(not all)
Correct Mileage for most of Nissan/Infiniti cars.(not all)
No need to buy tokens.
One Key Upgrade
Have good man-machine interaction.
With 100 point built-in tokens.
No deduction for 5-digit code to 4-digit code.
One point will be deducted for each success transfer of new 20-digit code to 20-digit code and successful reading of BCM code.
When 100 tokens used up, you can still use it to get 4-digit code, but you need to buy a new one if you want to read new 20-digit pin code.

Conclusion:
OBDSTAR F102 Nissan/Infiniti Mileage
    Nissan
        Altima
        Pathfinder
        Teana 2013
    Infinite
         JX35 2012-
         QX60 2013-
OBDSTAR F102 Nissan/Infiniti IMMO
    PINCODE  Calculator
        BCM NO.
        Immo box
        20 PINCODE
    Immbliliser
        No need 20 PINCODE
            13- Teana
            13-X-Trail
            15-Qashiqai
            Murano
            JX35 13-
            Q50
            QX60 13-
More information welcome contact with us:
Message from www.obd2cartool.com

Friday, October 28, 2016

eMMC socket with USB inferfact BGA adapter for smartphones and tablets

USB eMMC Test Socket Adapter is universal smart mobilephone eMMC Flash adapter,  eMMC socket with usb BGA test adapter comatible with: Toshiba, Samsung, Hynix, Intel, Sandisk, and other package 4BIT, 8BIT eMMC Flash.

To meet the needs to the BGA Programming Adapter in programmer adapters markets, obd2cartool.com offer a wide range of BGA Package Programming Adapter, including: BGA153/ 169/ 162/ 221 programmer adapter, FBGA48/BGA48 adapter, EBGA64 adapter...

obd2cartool.com also supply some specialized BGA programming adapters, if you have some particular needs about BGA programmer adapter, you can contact with us.

For almost MOVINAND/iNAND/EMMC memory chip:

For iPones 4/5/6 Flash memory:  VBGA11P5P  / VBGA134SP / LGA52P Test Socket
For Cool cell / Collpad phone:   VBGA56P / VBGA221P Test Socket
For 8530 Samsung others phones: VBGA153P Test Socket
For Samsung 9100/9300/9500/NO4/mi..: VBGA169P Test Socket
For HTC / Mi / 8721 Phones: VBGA162P Test Socket

For other newer phones, smartphones and tablets,  BlackBerrys: SBGA128P Test Socket, SBGA137NP Test Socket, SBGA152P Test Socket, SBGA188P / SBGA188AP / SBGA188BP Test socket, SBGA199P Test Socket, SBGA202P Test Socket, FBGA167 Test Socket.

There have many kinds of Wireless Remote frequency Tester and key programmer...


Message from www obd2cartool com,if you need BGA test socket adapter,MEMS sockets, Nand Flash socket,DDR Memory adapter or other sockets,please welcome contact with us: