Where to found true WIFI samtec Piwis tester 2 piwis ii VCI?

Piwis Tester II is professional Diagnostic Tool For Porsche. Piwis Samtec Porsche piwis 2 interface can work with latest software v18.150. Piwis II VCI for Porsche is Samtec Hardware and the latest professional tester for Porsche,powerful functions,full access. but where to order one high quality Piwis 2 VCI with true Wifi function? Yes, there obd2cartool.com has good feedback one. 

obd2carool Samtec Piwis tester ii

Why buy Samtec VCI Piwis 2 from obd2cartool?

1. Original Semtec project interface, can update, not J2534 or bad clone can't update or locked (choose a best one will save your money and save your time!!!  got a poor quality one after 2-3 month broken, then should send it back to repair. it  will lost shipping cost, lost device for diagnosis, lost business!)
PS: Famous OBD forum mhh Cartechlogy AP recommended version!
2. Full access to porsche Development verison!
3. Version: v18.150 support 2017 Porsche cars
4. Bluetooth,GPS and Navigation Function are available. can modify in Engineer mode.
5. Certificate is well installed, our Piwis II supports Online Functions, only two functions need to work online: Teach keys immo function and Parts protection function.




Piwis II User Notice:

1. After finish diagnostic, please quit the connection, and quit to the homepage of the software, then shut off the laptop in correct way(DO NOT Press Power Button, otherwise the system will be damaged).
2. This Piwis2 we sell is best quality and it is Semtec Hardware, which is 100% same as the porsche dealer has, not J2534 hardware, the J2534 FTDI hardware comes with different PCB,  and it has no certification make it is not able work with all modules, not support online functions.

Piwis Tester 2 for Porsche Functions:

1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

PIWIS II Wifi for Porsche OEM Wireless Solution Released! The wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi signal is really strong.
For the piwis ii wifi settng, firstly you need connect the USB cable to laptop, then setting in [VCI Config] by inputing the SSID and Password of router.

TIPS FOR CONFIGURING THE PIWIS II WIFI ROUTER
Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN
Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)

More message also could found here:
https://goo.gl/XjEPy5