BMW ICOM USB WIFI D-link install guide

BMW ICOM A2+B+C is the Dealer Level BMW Auto Diagnostic Tool, ICOM A2 is the latest BMW Group Service Tool for ECU programming, diagnosis, coding and complete system checking, ICOM A2 ISIS ISID hardware need work on ISTA/D and ISTA/P Dealer Level Software.
more diagnostic tool,Test socket adapter can visit www.obd2cartool.com


How to install BMW ICOM USB WIFI D-link?

1. Insert WIFI USB D-link into the computer via USB port

2. Turn off the computer built-in WIFI or additional WIFI resources. Make sure only BMW ICOM WIFI USB exist on the computer. Meanwhile, disable both Internet network and local area connection.

3. Then power on computer.

4. Open “Network Connections” program to check there is no other existing Internet and Local Area connection.

NOTE: Do not disable DWA-131 which is the ICOM WIFI USB. If it displays “X” mark, ignore it.

5. Run BMW ICOM Rheingold ISTA-D ISTA-P software, tick “WIFI for ICOM”

6. Connect BMW ICOM A2 emulator connector with vehicle. Wait 20-60 seconds until the BMW ICOM A2 WLAN indicator stops flashing or flashes slowly which indicates that well communication is built between WIFI USB adapter and BMW ICOM A2 WIFI.

7. Start using BMW ICOM ISTA-D diagnostic or ISTA-P programming software. Press OK to continue.

8. The ISTA-D, ISTA-P, ISPI, ISSS etc program cannot be turn off, but only be miniaturized.

9. The WIFI BMW ICOM diagnostic system device is recognized by computer. WIFI wireless diagnostic and programming function are activated.

What should you pay attention for usage:

1) Password: New hdd does not have hdd password. For old version hdd. First password is "BMW", just ignore second password, do not fill anything

2) Software for HDD is encrypted. Do not change anything setup on this software. Such as crack the software, or copy the software of hdd to other place, or change display Mode, such as some part is Hidden, do not change it display status. Just directly install and use the software.

3) No Network And Also No Connection With The Original Server When You Use The BMW ICOM Software HDD, Ortherwise It Is Will Be Damaged,And Need You Send Back For Repair

4) It comes with D-link adapter and Software HDD, they have the same serial number, you must use the software HDD and D-link together. HDD and D-LINK works together only when they have the same serial number. If you lost anyone of them, you need to buy the new set.

5) NEVER TRY TO CRACK OR COPY OUR HDD. 

Customer question:

Q:What's the password of BMW ICOM A2 Wifi?

A:First password is BMW,second password no need put anything.

 

Q: Can you tell me the difference tool of the 2014.09 BMW ICOM A2 + B + C diagnosis and programming Tool with other BMW ICOM device?

A: The 2014.09 BMW ICOM A2+B+C Diagnostic & Programming Tool(SP168) can support wifi function. The other tool BMW ICOM can not do it. There is one wifi chip is the interface. 

 

Q:I want to find one device to do the diagnostic of the BMW530 DA 2003. Can you recommend me one? 

A:You can try the BMW ICOM A2 series.

 

Q: If the BMW ICOM A2+B+C Diagnostic & Programming Tool can do the Programming Control Template EGS?

A: Yes, it can do.