Which one is better KESS V2 5.017 and KTAG 7.020 ?

Ktag 2.23 Mater with K-tag 7.020 Firmware And K-suite 2.23 software, obd2cartool high quality PCB with Murata Filters . High quality kess v2 v2.23 firmware 5.017 can work with internet, it have more 140 types of vehicle types or protocols than KESS V4.036, full set with Murata Filters.

KESS V2 5.017 is a ECU programming tool that is perfect for OBD use, while KTAG 7.020 is perfect for Jtag, BDM and all the Boot application (tricore and ST10).


With KESS V2 5.017 you programming directly through the OBD port of the vehicle, while with K-TAG 7.020 need to take apart the ECU and open it, Then can make the read/write operation.

Many ECU has the advantage that can be read and write from OBD port (so KESS V2 5.017 is perfect), but there are lots ECU need to disassemble from Vehicles , open the case for all the ECU that need to be programmed with Jtag, BDM and Bootprotocols, so KTAG 7.020 ECU programmer is needed.

So, if you read and write from OBD port and program with Jtag, BDM and Boot protocols, Better to choose KESS V2 5.017 + Ktag 7.020 together,there obd2cartool.com wholesale for this two items. If not, do not waste money in your pocket.

Where to find high quality Ktag 7.020 GPT with Murata Filters?

Ktag 7.020 Mater is a very popular ECU Programming Tool, high quality Ktag 7.020 will make work perfect. But where to find high quality Ktag 7.020 GPT with Murata Filters?

There obd2cartool.com could supply for Ktag 2.23 Mater K-tag 7.020 high quality PCB with Murata Filters . online work KTAG V7.020 Ksuite V2.23 ECU CHIP TUNING  with Unlimited Tokens,supports ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F, and so on, KTAG 7.020 Master at least 100 more ECU Types added

 obd2cartool K-TAG V7.020 KTAG ECU Programmer Unlimited Token with Murata Filters and no need replace many components.

obd2cartool KTAG V7.020 Highlight:
1. KTAG Ecu chiptuning latest Firmware version: V7.020
Software version: V2.23
2. ADD Many encrypted new car models works I.E Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc. 100+ ECU types added
3. No tokens limitation
4. Supports GPT and Toyota Denso ECUs
5. PCB already with these parts: WFs ,27E, Murata,K5B ,6B...

KTAG 7.020 work better with  V2.23 KESS V2 V5.017 Manager ECU Tuning Kit Kess V2 Master No Token Limitation

OBD2cartool.com new released 2017 new bdm frame with 4 probes and led,  New bdm frame with probe mesh and led is designed for kess ktag fgtech bdm100 ecu programming, work more easy !!

How to choose suitable vcds 20.4 vagcom 20.4 diagnostic cable?

When you search for vcds 20.4 diagnostic cable on google, you can find out lots of vagcom vcds version and different price. Here obd2cartool.com julie will guide you to choose latest v17.8 hex can usb interface. Vagcom vcds 20.4 latest cable from obd2cartool.com search out you can find two links Model: OBD662 and Model: OBD648.

ATMEGA162 VAG COM 17.8.0 cable VAGCOM 17.8 full english/French interface For VW Audi Seat Skoda, It is support reflash dumps to newer version.

If you wanna a stable latest vcds cable, and price is affordable, here vcds 17.8 /19.6/20.4 en/fr atmega162 diagnostic interface is a good choice for you.

Vagcom 20.4 HEX CAN USB Interface VCDS 19.6 online update version 16 multilanguage

If you wanna one cable which can update for further update online, and your car model is newer, here vcds 20.4 updatable online version is good for you.

Difference between obd2cartool.com atmega162 vagcom 17.8 and vagcom 17.8 online updatable version:

1. language: atmage162 vagcom 17.8/20.4 support english and french version or reflash different languages by you dumps. while vagcom 20.4 online updatable version support 16 languages including: Chinese, English, French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, Romania

2. update: atmega162 vagcom 17.8/20.4 support DIY reprogramming to any version and languages by your dumps! while vagcom 17.8 online updatable version support online updatable.Newer version is vag com 20.12.0 version.

K-TAG V7.020 KTAG 7.020 ECU Programmer Ksuite V2.23 Master Version with Unlimited Token

K-TAG V7.020 KTAG ECU Programmer Ksuite V2.23 Master Version with Unlimited Token full set with GPT cable

Ktag 7.020 Mater is K-TAG V2.23 ECU Programming Tool. Ktag 2.23 Mater with K-tag 7.020 Firmware And K-suite 2.23 software. KTAG V7.020 Ksuite V2.23 ECU CHIP TUNING  with Unlimited Tokens,supports ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F, and so on, Ktag 7.020  ECU tool at least 100 more ECU Types added

---

K-TAG V7.020 KTAG ECU Programming Tool Ksuite V2.23 Master Version with Unlimited Token

obd2cartool KTAG V7.020 Highlight:
1. KTAG Ecu chiptuning latest Firmware version: V7.020
   Software version: V2.23
2. ADD Many encrypted new car models works I.E Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc. 100+ ECU types added
3. No tokens limitation
4. Supports GPT and Toyota Denso ECUs

5. Ktag 7.020 prefect work with Kess v2 5.017 ECU chip tuning.

KTAG 7.020  Master two version to  choose:

Optional 1: K-TAG V7.020/ 2.23 without Reset button.

Optional 2: K-TAG V7.020/ 2.23 with Reset button, Unlimited Tokens.

Ktag V2.23 Mater Function:
 Multi-Language available: Italian Deutsch English French Portuguese Spanish
Support BDM Function Well, no checksum error, available Protocols BDM MOTOROLA MPC5xx
Support both Car, Motorcyle and Truck ECU Programming
Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN

Update: By CD or Download link only. ( Contact customer service to get new ktag software)

V2.23 KTAG Ksuite Description:
The new K-TAG is 100% J-Tag compatible, but in a completely different way. Usually J-Tag programmers are available only for big productions, never present in chiptuning devices. Using only the essential components, Alientech have merged J-Tag, Motorola BDM/Nexus and Bootloader Mitsubishi/Infineon Tricore/ST communication lines into a single product.
 

V2.23 K-TAG works in perfect harmony. Learn how to use K-TAG takes almost no time, because all the communication protocols operate along similar principles. Once you have learned to use a protocol, you will naturally use all the others. Alientech knows what it means to work in motion. For this reason the research methods of the protocols and choice of vehicles are detailed and ordered.
 

Unlike many ECU programming tools, with K-TAG you have at your disposal only the applications you really need. Once you have the hardware, you can choose which group of protocols to enable and then start working. In this page you can find a complete list of the ECU currently supported by K-TAG.

More detail:

https://goo.gl/6RXDqU

Vagcom 20.4.2 Kable vag com 20.4 Interface VCDS 17.8 interface online update version Promotion!!

Latest update online version Vag com 20.4.2 Kable arrived on obd2coding.com vag diagnostic cable centre. Vagcom 20.4 HEX CAN USB Interface have 16 Languages Diagnose cable for AUDI VW SEAT SKODA. update version VCDS 20.4 Kable main changes is BUG fixes and improvements support Windows 10 system.

VAG COM 20.4 Kable Features:
1. The product use the official software and update online, so you can always get the newest software version. and also support lower version like vcds 15.7, vagcom 16.8,vag com 17.1...
2. You can get access to Internet and with reset function.
3. This product can support long coding，fast scanning fuctions.
4. It supports 16 Languages.( Support 16 languages, including of Chinese, English, French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, Romania.)
5. It supports Firmware update online, always the newest version.

6. Hardware version: V6.0